En-12975 Heat Pipe Solar Collector---Solar Keymark,SRCC,CE CCC

En-12975 Heat Pipe Solar Collector 1. EN12975, Solar key mark, SRCC, CE, ISO. 2. 0.68~0.73 premium conversion factor

 En-12975 Heat Pipe Solar Collector

The working principle of solar collector is very simple.

1. Solar Absorption: Solar radiation is absorbed by the evacuated vacuum tubes and converted into heat.

2. Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to header.

3. Solar Energy Storage: Water or water mix is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oC / 9-18oF. Throughout the day, the water in the storage tank is gradually heated.

Characteristic

1. Adopts red copper channel, with great performance of heat exchange.

2. Utilize copper heat pipes containing special medium liquid with low boiling point.

3. Work well in all climate, can be function well even in ambient temperature of minus 30 degree Celsius.

4. Each heat pipe tube works independently and efficiently.

5. No water flows inside the vacuum tube, no risk of freezing.

6. Withstand high water pressure of up to 1.2 Mpa.

HEAT PIPE SOLAR COLLECTOR TECHNICAL DATA
MANIFOLD	Manifold casing material	Anodized aluminum alloy
	Manifold header pipe	TU2 copper
	Insulation layer	Compressed rock wool.
VACUUM TUBES	Structure	Single target or Three targets - magnetron sputtering plating
	Sediment method	AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN
	Tube size	58*1800mm
	Useful life	More than 15 years
HEAT PIPES:	Heat pipe material	Oxygen free copper (TU1),Cu=Ag>99.99%(o2<16ppm)
	Heat pipe size	Top: Dia.14mm/ 20mm/22mm/ 24mm, Body: Dia.8mm
BRACKET	Bracket:	Stronger galvanized steel / Stainless steel/aluminium alloy
	Bracket angle:	0,18,22,38,45 optional, pitched roof, flat roof optional.
	Fastening pieces:	Made of zinc-coated stainless steel..
MODEL No.	JXSC-58-(Tube No.)	10 tubes/ 12 tubes/ 15 tubes/ 18 tubes/ 20 tubes/ 24 tubes/ 30 tubes

 

Feature:

 Solar collector,solar energy collector,solar power collector,solar thermal collector.

1. Manifold (interior)material: red copper

2. Manifold (exterior) material: aluminum alloy

3. Tube dimensions: 58 x 1800mm,47x1500mm

4. Vacuum tube coating material: AIN-SS-Cu

(Three target vacuum tube)

5. Insulation layer: rock wool

6.Test pressure: 6 bar

7.Heat preservation: 72 hrs 

8.Hail resistance: 25mm     

 

En-12975 Heat Pipe Solar Collector---Solar Keymark,SRCC,CE CCC